Rockford Fosgate T1000-4AD
Rockford Fosgate T1000-4AD
Regular price
$999.99 USD
Regular price
Sale price
$999.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Rockford Fosgate's 4-channel car amplifier. This amp's bigger than its size. Four channels of 250 RMS watts is enough to take most SPL speakers to their extreme limits. Or you can bridge your T1000-4ad to blast 500 watts each to a pair of subwoofers.
250 watts RMS x 4 at 1 to 4 ohms
500 watts RMS x 2 bridged output at 2 ohms (2-ohm stable in bridged mode)
CEA-2006 compliant
Dynamic Thermal Management cooling system
Differential Input circuitry eliminates hum
variable high- and low-pass filters (50-500 Hz, 24 dB/octave)
variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
optional remote bass/treble boost
Class-AD amplifier design with Constant Power
preamp inputs and outputs
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
14-7/8"W x 2-1/4"H x 9-1/8"D
Specifications:
RMS Power Output (Watts x Channels) - 250 x 4
Power at 2 Ohms (Watts x Channels) - 250 x 4
Bridged Power (Watts x Channels) - 500 x 2
Minimum Impedance Bridged - 2
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 75 dB
Input Voltage - 14.4v
Amplifier Class - A/D
Low-Pass Crossover Frequency - 50-500 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
High-Pass Crossover Frequency - 50-500 Hz
High-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 150
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-7/8
Height (inches) - 2-1/4
Depth (inches) - 9-1/8
250 watts RMS x 4 at 1 to 4 ohms
500 watts RMS x 2 bridged output at 2 ohms (2-ohm stable in bridged mode)
CEA-2006 compliant
Dynamic Thermal Management cooling system
Differential Input circuitry eliminates hum
variable high- and low-pass filters (50-500 Hz, 24 dB/octave)
variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
optional remote bass/treble boost
Class-AD amplifier design with Constant Power
preamp inputs and outputs
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
14-7/8"W x 2-1/4"H x 9-1/8"D
Specifications:
RMS Power Output (Watts x Channels) - 250 x 4
Power at 2 Ohms (Watts x Channels) - 250 x 4
Bridged Power (Watts x Channels) - 500 x 2
Minimum Impedance Bridged - 2
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 75 dB
Input Voltage - 14.4v
Amplifier Class - A/D
Low-Pass Crossover Frequency - 50-500 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
High-Pass Crossover Frequency - 50-500 Hz
High-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 150
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-7/8
Height (inches) - 2-1/4
Depth (inches) - 9-1/8
