Rockford Fosgate T1500-1BDCP
Rockford Fosgate T1500-1BDCP
Regular price
$699.99 USD
Regular price
Sale price
$699.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
With its super efficient Class-BD circuit topology and Constant Power configuration, the Rockford Fosgate Power T1500-1bdCP assures maximum power output. Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. The amplifier is 1-ohm stable (1500 watts x 1) and will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
mono subwoofer amplifier
1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms)
1,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter (35-250 Hz, 24 dB/octave)
selectable subsonic filter (28Hz, 24 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
preamp-level inputs and outputs
4-gauge power and ground leads and a 200-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 8-15/16"D
Specifications:
RMS Power Output (Watts x Channels) - 1000 x 1
Peak Power Output (Watts x Channels) - 1900 x 1
Power at 2 Ohms (Watts x Channels) - 1500 x 1
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-250 Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 80 dB
Input Voltage - 14.4v
Amplifier Class - BD
Low-Pass Crossover Frequency - 34-250 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 200
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-15/16
Height (inches) - 2-1/4
Depth (inches) - 8-15/16
mono subwoofer amplifier
1,000 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms)
1,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter (35-250 Hz, 24 dB/octave)
selectable subsonic filter (28Hz, 24 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
preamp-level inputs and outputs
4-gauge power and ground leads and a 200-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 200-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 8-15/16"D
Specifications:
RMS Power Output (Watts x Channels) - 1000 x 1
Peak Power Output (Watts x Channels) - 1900 x 1
Power at 2 Ohms (Watts x Channels) - 1500 x 1
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-250 Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 80 dB
Input Voltage - 14.4v
Amplifier Class - BD
Low-Pass Crossover Frequency - 34-250 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 200
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-15/16
Height (inches) - 2-1/4
Depth (inches) - 8-15/16
