Rockford Fosgate T2500-1BDCP
Rockford Fosgate T2500-1BDCP
Regular price
$1,299.99 USD
Regular price
Sale price
$1,299.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
With its super efficient Class-BD circuit topology, the Rockford Fosgate T2500-1bd assures maximum power output. Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. The amplifier is 1-ohm stable (2,500 watts x 1) and will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Mono subwoofer amplifier
1,500 watts RMS x 1 at 4 ohms (2,500 watts RMS x 1 at 2 ohms)
2,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
Master Sync: allows two of these amps to be tied together
Variable low-pass filter (32-250 Hz, 24 dB/octave)
Selectable subsonic filter (28Hz, 12 dB/octave)
Variable bass boost (0-18 dB at 45 Hz)
Optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
Preamp inputs and outputs
1/0-gauge power and ground leads and an 250-amp fuse recommended — wiring and Hardware not included with amplifier
No onboard fuses — when installing multiple amps in a system, an additional 250-amp In-line fuse between the distribution block and the amplifier is recommended
21-7/8"W x 2-3/16"H x 9-7/16"D
Specifications:
RMS Power Output (Watts x Channels) - 1500 x 1
Peak Power Output (Watts x Channels) - 5000 x 1
Power at 2 Ohms (Watts x Channels) - 2500 x 1
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-250 Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 70 dB
Input Voltage - 14.4v
Amplifier Class - BD
Low-Pass Crossover Frequency - 35-250 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 300
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 21-7/8
Height (inches) - 2-3/16
Depth (inches) - 9-7/16
Mono subwoofer amplifier
1,500 watts RMS x 1 at 4 ohms (2,500 watts RMS x 1 at 2 ohms)
2,500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
Master Sync: allows two of these amps to be tied together
Variable low-pass filter (32-250 Hz, 24 dB/octave)
Selectable subsonic filter (28Hz, 12 dB/octave)
Variable bass boost (0-18 dB at 45 Hz)
Optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages
Preamp inputs and outputs
1/0-gauge power and ground leads and an 250-amp fuse recommended — wiring and Hardware not included with amplifier
No onboard fuses — when installing multiple amps in a system, an additional 250-amp In-line fuse between the distribution block and the amplifier is recommended
21-7/8"W x 2-3/16"H x 9-7/16"D
Specifications:
RMS Power Output (Watts x Channels) - 1500 x 1
Peak Power Output (Watts x Channels) - 5000 x 1
Power at 2 Ohms (Watts x Channels) - 2500 x 1
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-250 Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 70 dB
Input Voltage - 14.4v
Amplifier Class - BD
Low-Pass Crossover Frequency - 35-250 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 300
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 21-7/8
Height (inches) - 2-3/16
Depth (inches) - 9-7/16
