Rockford Fosgate T600-4
Rockford Fosgate T600-4
Regular price
$599.99 USD
Regular price
Sale price
$599.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The T600-4 amplifier puts out 100 watts RMS into each of its four channels — more than enough to drive your front and rear speakers to their musical peaks. Or you can bridge your T600-4 to blast 300 watts each to a pair of subwoofers.
4-channel car amplifier
100 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
300 watts RMS x 2 bridged output at 4 ohms (2-ohm stable in bridged mode)
CEA-2006 compliant
Dynamic Thermal Management cooling system
Differential Input circuitry eliminates hum
variable high- and low-pass filters (20-500 Hz, 24 dB/octave)
variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
optional remote bass/treble boost
Class-AB amplifier design
MOSFET power and output stages
preamp inputs and outputs
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no on-board fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 9-5/8"D
Specifications:
RMS Power Output (Watts x Channels) - 150 x 4
Bridged Power (Watts x Channels) - 300 x 2
Minimum Impedance Bridged - 2
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 0.1%
Signal to Noise Ratio - 85 dB
Input Voltage - 14.4v
Amplifier Class - AB
Low-Pass Crossover Frequency - 20-500 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
High-Pass Crossover Frequency - 20-500 Hz
High-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 150
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-15/16
Height (inches) - 2-1/4
Depth (inches) - 9-5/8
4-channel car amplifier
100 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
300 watts RMS x 2 bridged output at 4 ohms (2-ohm stable in bridged mode)
CEA-2006 compliant
Dynamic Thermal Management cooling system
Differential Input circuitry eliminates hum
variable high- and low-pass filters (20-500 Hz, 24 dB/octave)
variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
optional remote bass/treble boost
Class-AB amplifier design
MOSFET power and output stages
preamp inputs and outputs
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
no on-board fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
14-15/16"W x 2-1/4"H x 9-5/8"D
Specifications:
RMS Power Output (Watts x Channels) - 150 x 4
Bridged Power (Watts x Channels) - 300 x 2
Minimum Impedance Bridged - 2
Minimum Impedance Unbridged - 1
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 0.1%
Signal to Noise Ratio - 85 dB
Input Voltage - 14.4v
Amplifier Class - AB
Low-Pass Crossover Frequency - 20-500 Hz
Low-Pass Slope (dB/octave) - 24 dB/oct
High-Pass Crossover Frequency - 20-500 Hz
High-Pass Slope (dB/octave) - 24 dB/oct
Bass Boost - 0-18 dB
Bass Boost Frequency - 45 Hz
Fan Cooled - No
Fuse Rating - 150
Speaker Level Inputs - No
Preamp Outputs - 1 pair
Width (inches) - 14-15/16
Height (inches) - 2-1/4
Depth (inches) - 9-5/8
