•
1 5

Kenwood X502-1

Kenwood X502-1

$200.00 USD
$200.00 USD
Sale Sold out
Shipping calculated at checkout.
Any basshead will tell you that big power is key to great sound, but sometimes you just don't have much space for a big amp. Kenwood's Excelon X502-1 mono subwoofer amplifier can send up to 500 watts RMS to your subwoofer, and it'll fit almost anywhere in your vehicle. A precise low-pass filter lets you optimize the sound for your sub, while the built-in bass boost lets you dial in just the right amount of thump. The subsonic filter removes ultra-low bass so that your amp and subs can operate more efficiently. An optional wired remote control lets you control your sub's level from the front seat.

Product highlights:

  • Mono subwoofer amplifier
  • 300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
  • CTA-2006 compliant
  • Class-D amplifier design
  • Variable low-pass filter (50-200 Hz at 24 dB/octave)
  • Bass boost (0-18 dB at 40 Hz)
  • Subsonic filter (25 Hz at 24 dB per octave)

Output Coil with Magnetic Shield

Prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.

High Quality Capacitors

PMLCAP's (Polymer Multi-Layer Capacitors) are utilized in the LC filter circuits to decrease distortion, ensuring clear detail for a truer to life sound.

Infrasonic Filter (ISF)

When the Infrasonic Filter Switch is turned on, the amplifier cuts off the low frequencies below 25Hz, which makes the amplifier’s power supply and output devices more efficient, providing clear bass output.

Sliding Terminal Cover

Detachable sliding terminal cover offers a sleek design and easier installation.

One-side Connection

All terminals and connections are on one side for easier installation and a cleaner look.

Variable Gain Circuit

Improved Signal to Noise Ratio

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Optional Wired Level Control Ready

The optional KCA-RC01A wired remote level control allows you to easily adjust the subwoofer volume.

General Features:

X802-5 X502-1 X302-4
MAX POWER 1600W 1000W 600W
RMS POWER OUTPUT (4Ω) 50W x 4 + 300W 300W 50W x 4
RMS POWER OUTPUT (2Ω) 75W x 4 + 500W 500W 75W x 4
RMS POWER OUTPUT Bridged 150W x 2 (Bridged) + 300W - 150W x 2 (Bridged)
Features Speaker Level Input Speaker Level Input Speaker Level Input
Signal Sensing Turn-On Signal Sensing Turn-On Signal Sensing Turn-On
Variable High Pass Filter Variable Low Pass Filter Variable High Pass Filter
Variable Low Pass Filter Infrasonic Filter Variable Low Pass Filter
Bass Boost Bass Boost Bass Boost
Optional Wired Remote Ready Optional Wired Remote Ready
Dimensions (W)9-3/4" x (H) 2-1/16” x (D)6-5/8”  (W)8-3/8” x (H)2-1/16” x (D)5-7/8”  (W)8-3/8” x (H)2-1/16” x (D)5-7/8” 
Weight 4.6lbs (2.1kg) 3.3lbs (1.5kg) 3.1lbs (1.4kg)

More Info:

  • Optional KCA-RC01A wired remote level control available
  • Preamp and speaker-level inputs
  • Wiring and hardware not included with amplifier
  • 8-gauge power and ground leads recommended
  • Fuse rating: 30A x 2
  • 8-7/16"W x 2-1/8"H x 5-15/16"D

    View full details