JL Audio AP 6-Channel Compact Marine Amplifier

This JL Audio AP 6-channel Class-D marine amplifier combines a compact enclosure with manual controls through its built-in LCD display. It is designed for demanding marine installations and is IP67-rated, excluding cables.

Features

• Ignition-protected design.
• Built-in LCD display for manual setup.
• Selectable high-pass, low-pass or off modes on each channel pair.
• Easy Tune requires a compatible stereo with built-in DSP and the Garmin Audio app.
• This version does not include built-in Bluetooth audio streaming.

Specifications

• Channels: 6
• Amplifier class: Class D
• RMS output at 4 ohms (14.4 V, <1% THD): Channels 1–4: 50 W x 4; channels 5–6: 100 W x 2
• RMS output at 2 ohms (14.4 V, <1% THD): Channels 1–4: 75 W x 4; channels 5–6: 150 W x 2
• Bridged RMS output at 4 ohms (14.4 V, <1% THD): Channels 1–4: 150 W x 2; channels 5–6: 300 W x 1
• Operating voltage: 9–16 V DC
• Frequency response (+0 / −1 dB): 20 Hz–20 kHz
• Width: 11.81 in (300 mm)
• Height: 1.86 in (47 mm)
• Depth: 5.90 in (150 mm)
• Recommended fuse: 70 A
• Minimum copper power/ground wire: 4 AWG

Included

JL Audio AP amplifier, four mounting screws and documentation.

Installation

Follow the marine installation instructions for power wiring, fusing, cable protection and speaker loads. The IP67 rating excludes cables. Easy Tune compatibility must be verified with the source stereo.

Garmin part number: 010-03430-00

Official Garmin product information