JL Audio RD 5-Channel System Amplifier, 900 W (010-03186-00)

This JL Audio RD five-channel Class-D amplifier combines four main speaker channels with a dedicated subwoofer channel. Garmin part number 010-03186-00 provides up to 900 watts total RMS output into 2-ohm loads at 14.4 volts.

Features

• NexD switching technology.
• Main-channel high-pass filtering and a dedicated subwoofer low-pass filter.
• LED clipping indicator for input-sensitivity setup.
• Signal-sensing, DC-offset sensing or remote-wire turn-on.
• Selectable input mode and type for flexible signal routing.

Specifications

• Amplifier class: Class D
• Channels: 5
• RMS output at 4 ohms (14.4 V, <1% THD): Main: 70 W x 4; subwoofer: 225 W x 1
• RMS output at 2 ohms (14.4 V, <1% THD): Main: 100 W x 4; subwoofer: 500 W x 1
• Main-channel frequency response (+0 / −1 dB): 12 Hz–22 kHz
• Subwoofer frequency response (+0 / −1 dB): 10–500 Hz
• Crossover adjustment: 50–500 Hz, 12 dB/octave
• Input voltage range: 200 mV–2 V RMS (low) or 800 mV–8 V RMS (high)
• Dimensions (W x H x D): 14.66 x 2.13 x 6.96 in (372 x 54 x 177 mm)
• Recommended fuse: 80 A
• Minimum copper power/ground wire: 4 AWG

Included

RD amplifier, 2.5 mm Allen wrench and JL Audio badge.

Installation

Use properly sized power and ground wiring, suitable overcurrent protection and compatible speaker loads. Follow the installation manual for wiring, ventilation, input sensitivity and crossover setup. Wiring kits and optional remote controls are not included unless explicitly listed.

Garmin part number: 010-03186-00

Official Garmin product information