JL Audio VX1000/1i Monoblock Subwoofer Amplifier with DSP, 1000 W

The JL Audio VX1000/1i is a Class-D monoblock amplifier with integrated DSP for a subwoofer system. TüN software provides control over equalization, delay, crossover filtering, routing and output level.

Features

• Integrated DSP for equalization, delay, crossover configuration, signal routing and mixing.
• Setup and audio adjustments through JL Audio TüN software.
• Differential-balanced inputs accepting line-level or speaker-level signals.
• Removable power, input and speaker connections.
• Remote-wire, signal-sensing or DC-offset turn-on options.

Specifications

• Amplifier class: Class D
• Channels: 1
• RMS output at 4 ohms (14.4 V, <1% THD): 600 W x 1
• RMS output at 2 ohms (14.4 V, <1% THD): 1000 W x 1
• Operating voltage: 11–14.5 V DC
• Frequency response (+0 / −1 dB): 12 Hz–500 Hz
• Input voltage range: 200 mV–16 V RMS
• Dimensions (W x H x D): 11.32 x 2.12 x 6.62 in (287 x 54 x 168 mm)
• Recommended fuse: 80 A
• Minimum copper power/ground wire: 4 AWG

Included

VXi amplifier, power connector, analog input harness, subwoofer output connector, 6-foot USB A/B cable, four corner caps, corner-cap tool and Allen wrenches.

Installation

Use properly sized power and ground wiring, suitable overcurrent protection and compatible speaker loads. Follow the installation manual for wiring, ventilation, input sensitivity and crossover setup. Wiring kits and optional remote controls are not included unless explicitly listed.

Garmin part number: 010-03329-00

Official Garmin product information