JL Audio VX700/5i 5-Channel System Amplifier with DSP, 700 W

The JL Audio VX700/5i combines four full-range channels, a dedicated subwoofer channel and integrated DSP in one amplifier. It provides a compact way to power and tune a complete car-audio speaker and subwoofer system.

Features

• Integrated DSP for equalization, delay, crossover configuration, signal routing and mixing.
• Setup and audio adjustments through JL Audio TüN software.
• Differential-balanced inputs accepting line-level or speaker-level signals.
• Removable power, input and speaker connections.
• Remote-wire, signal-sensing or DC-offset turn-on options.

Specifications

• Amplifier class: Class D
• Channels: 5
• RMS output at 4 ohms (14.4 V, <1% THD): Main: 75 W x 4; subwoofer: 180 W x 1
• RMS output at 2 ohms (14.4 V, <1% THD): Main: 100 W x 4; subwoofer: 300 W x 1
• Operating voltage: 11–14.5 V DC
• Input voltage range: 200 mV–16 V RMS
• Width: 9.81 in (250 mm)
• Height: 2.12 in (54 mm)
• Depth: 6.62 in (168 mm)
• Recommended fuse: 60 A
• Minimum copper power/ground wire: 4 AWG

Included

VXi amplifier, power connector, analog input harness, speaker and subwoofer output harnesses, 6-foot USB A/B cable, four corner caps, corner-cap tool and Allen wrenches.

Installation

Use properly sized power and ground wiring, suitable overcurrent protection and compatible speaker loads. Follow the installation manual for wiring, ventilation, input sensitivity and crossover setup. Wiring kits and optional remote controls are not included unless explicitly listed.

Garmin part number: 010-03332-00

Official Garmin product information