1
/
of
4
Rockford Fosgate R2-300X4
Rockford Fosgate R2-300X4
Regular price
$279.99 USD
Regular price
Sale price
$279.99 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
The Rockford Fosgate Prime R2-300X4 is a 4-channel full-range Class D amplifier. It's effectively two full range 2-channel amps built into one chassis, labeled Front and Rear. Each section of the amp is bridgeable, so it can be wired as 4-channel, 3-channel, or 2-channel.
4-channel car amplifier
50 watts RMS x 4 at 4 ohms
75 watts RMS x 4 at 2 ohms
150 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
CTA-2006 compliant
Class-D amplifier design
variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
C.L.E.A.N. gain setup system includes clip lights
auto remote turn-on
preamp and speaker-level inputs
preamp outputs
wiring, fuse, and hardware not included with amplifier
4-gauge power and ground leads and a 60-amp fuse recommended
dimensions: 10-1/16"W x 2"H x 7-3/4"D
warranty: 1 year
Specifications:
RMS Power Output (Watts x Channels) - 50 x 4
Power at 2 Ohms (Watts x Channels) - 75 x 4
Bridged Power (Watts x Channels) - 150 x 2
Minimum Impedance Bridged - 4
Minimum Impedance Unbridged - 2
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 70 dB
Input Voltage - 14.4v
Amplifier Class - D
Low-Pass Crossover Frequency - 50-250 Hz
Low-Pass Slope (dB/octave) - 12 dB/octave
High-Pass Crossover Frequency - 50-250 Hz
High-Pass Slope (dB/octave) - 12 dB/octave
Bass Boost - No
Fan Cooled - No
Fuse Rating - 60
Speaker Level Inputs Harness
Preamp Outputs - 1 pair
Width (inches) - 10-1/16
Height (inches) - 2
Depth (inches) - 7-3/4
4-channel car amplifier
50 watts RMS x 4 at 4 ohms
75 watts RMS x 4 at 2 ohms
150 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
CTA-2006 compliant
Class-D amplifier design
variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
C.L.E.A.N. gain setup system includes clip lights
auto remote turn-on
preamp and speaker-level inputs
preamp outputs
wiring, fuse, and hardware not included with amplifier
4-gauge power and ground leads and a 60-amp fuse recommended
dimensions: 10-1/16"W x 2"H x 7-3/4"D
warranty: 1 year
Specifications:
RMS Power Output (Watts x Channels) - 50 x 4
Power at 2 Ohms (Watts x Channels) - 75 x 4
Bridged Power (Watts x Channels) - 150 x 2
Minimum Impedance Bridged - 4
Minimum Impedance Unbridged - 2
Best Frequency Response - 20-20k Hz
THD at Rated RMS Power - 1%
Signal to Noise Ratio - 70 dB
Input Voltage - 14.4v
Amplifier Class - D
Low-Pass Crossover Frequency - 50-250 Hz
Low-Pass Slope (dB/octave) - 12 dB/octave
High-Pass Crossover Frequency - 50-250 Hz
High-Pass Slope (dB/octave) - 12 dB/octave
Bass Boost - No
Fan Cooled - No
Fuse Rating - 60
Speaker Level Inputs Harness
Preamp Outputs - 1 pair
Width (inches) - 10-1/16
Height (inches) - 2
Depth (inches) - 7-3/4
Share


